The Heating, Ventilation and Air Conditioning (HVAC) system is divided into
3 separate sections. The first, Heating, Ventilation and Air Conditioning, has all
procedures that pertain to a HVAC component or function that is not specifically associated
with the manual or automatic control system. The second, HVAC Systems - Manual,
has procedures specific to the Manual control system and the third, HVAC systems -
Automatic, has procedures specific to the automatic control system. The DTCs and scan
tool data that support the manual HVAC system are also relevant for the automatic
HVAC system. To minimise data duplication this information is located in HVAC Systems
- Automatic.
Begin the system diagnosis with the
Diagnostic System Check - Vehicle
. The diagnostic system check will provide the following
information:
| • | The identification of the control modules which command the system. |
| • | The ability of the control modules to communicate through the serial data
circuit. |
| • | The identification of any stored diagnostic trouble codes (DTCs) and their
status. |
The use of the diagnostic system check will identify the correct procedure for
diagnosing the system and where the procedure is located.
Review the description and operation information to help you determine the correct
symptom diagnostic procedure when a malfunction exists. Reviewing the description
and operation information will also help you determine if the condition described
by the customer is an abnormal operation. The HVAC description and operation information
is divided into the following:
The air delivery description and operation contains the following topics:
| • | HVAC control components. |
| • | Recirculation operation. |
The air temperature description and operation contains the following topics:
| • | HVAC control components. |
| • | Heating and A/C operation. |
