GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 HVAC 🢒 Heating, Ventilation, and Air Conditioning 🢒 O-Ring Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Important: This procedure applies to all 'O-ring throughout the A/C system.

  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.

    2. Object Number: 1955633 Size: SH

    Important: The O-ring seal (1) is a single use item and must be discarded after use.

    Important: Using a suitable tool, gently insert the end of the tool under the O-ring seal (1) and lift O-ring seal (1), evenly all the way around, off the A/C refrigerant component (2).

  2. Remove the O-ring seal (1) from the A/C refrigerant component (2).

    3. Object Number: 1955630 Size: SH
  3. Inspect the O-ring seal (1) for signs of damage.
  4. Inspect the A/C refrigerant component (2) for damage or burrs. Repair if necessary.

    5. Important: Cover any opening of the A/C system with a suitable cap or tape immediately, to prevent absorption of moisture from the atmosphere.

  5. Cap or tape the A/C refrigerant component (2).
  6. Discard the O-ring seal.

Installation Procedure

    Object Number: 1955630 Size: SH
  1. Inspect the NEW O-ring seal (1) for any sign or cracks, cuts, or damage. Replace if necessary.
  2. Remove the cap or tape from the A/C refrigerant component (2).
  3. Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the A/C refrigerant component (2).
  4. Coat the NEW O-ring (1) with refrigerant oil.
  5. Carefully slide the NEW O-ring seal (1) onto the A/C refrigerant component.

    6. Object Number: 1951007 Size: SH
  6. The O-ring seal must be fully seated.
  7. Assemble the A/C components. Refer to the appropriate repair procedure.