Headliner Description. Holden WM Sedan 2009

For 1990-2009 cars only

Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Body Hardware and Trim 🢒 Floor Coverings and Headlinings 🢒 Headliner Description

Headliner Description Sportwagon

Formed Headlining

Headliner Component View


(1)	Headliner Rear Clip Assembly
(2)	Headliner
(3)	Acoustic Pads
(4)	Washer Hose
(5)	Wiring Harnesses

Important: The headlining (2) is only serviced as a complete assembly.

The headlining (2) is a one-piece composite substrate that is covered with a foam cloth facing. The construction of the composite substrate does not allow for replacement of the cloth facing and requires that the headlining substrate and cloth be serviced as a complete assembly. The headlining wiring harness (5), acoustic pads (3), and the headlining rear clip assembly (1) are an integral part of the headlining (2) and are not serviced as separate components. The rear window washer hose (4) is also an integral part of the headlining (2) but is serviceable. The headlining is retained to the roof panel by the headlining rear clip assembly (1), assist handles and the front sunshades. Additional support is also provided by interior trims and panels around the perimeter and in the centre of the headlining (2).

Headliner Description LHD Sedan

Formed Headliner

Important: The headliner is only serviced as a complete assembly

•	The headliner (4) is a one-piece composite substrate that is covered with a foam cloth facing.

•	The electrical wiring harness (2) for the roof lighting (3, 5), is not a serviceable item and should be left attached to the headliner when the headliner is being removed.

•	The headliner is held up to the roof panel by the use of located components, the overhead console (3), the assist handles (1) fasteners, the rear high mounted stop lamp (6).

•	If the vehicle is equipped with a sunroof, there are six patches of velcro™ material around the sunroof opening which add extra support for the headliner.

Headliner Description RHD Sedan

Formed Headliner

Important: The headliner is only serviced as a complete assembly

•	The headliner (2) is a one-piece composite substrate that is covered with a foam cloth facing.

•	The electrical wiring harness (4) for the roof lighting (3, 5), is not a serviceable item and should be left attached to the headliner when the headliner is being removed.

•	The headliner is held up to the roof panel by the use of located components, the overhead console (3), the assist handles (1) fasteners, the rear high mounted stop lamp (6).

•	If the vehicle is equipped with a sunroof, there are six patches of velcro™ material around the sunroof opening which add extra support for the headliner.