For 1990-2009 cars only
Tools Required
| • | DT-47722 Shift Rail Bushing Remover and Installer |
| • | J 2619-01 Slide Hammer |
| • | J 26941 Bushing and Bearing Remover 3-4 in |
Rear Case Disassemble
- Remove the oil trough (1) from the rear case.
- Remove the counter gear roller bearing retainer to rear case retaining bolt (1).
- Remove the counter gear roller bearing retainer from the rear case.
- Remove the gasket (3) from the rear case.
- Using J 26941 and J 2619-01 , remove the counter gear roller bearing (1) from the rear case.
- Using DT-47722 , remove the shift shaft bearing (1) from the rear case.
Middle Case Disassemble
Using DT-47722 , remove the shift shaft bearing (1) from the middle case.
Clutch Housing Disassemble
Using a suitable tool, remove the input shaft seal (1) from the front case (2).
