GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Transmission 🢒 Automatic Transmission - 6L50/6L80/6L90 🢒 Center Support, Output Carrier and Output Shaft Installation

Object Number: 1566329 Size: MF

Callout

Component Name

1

Output Shaft Thrust Bearing Assembly

2

Output Carrier Assembly and Output Shaft Assembly

Notice: Refer to General Repair Instructions in the Preface section.

Notice: Refer to General Repair Instructions in the Preface section.

Special Tool

DT 47786 Output Carrier/Shaft Lifting Tool

3

Center Support Assembly

    • When the center support assembly is properly installed, the fluid passages should align with the fluid passage seal bores in the case assembly.
    • It may be necessary to rotate the output shaft by hand in order to fully install the center support assembly.

4

Center Support Retaining Ring

Caution: Refer to General Repair Instructions in the Preface section.

Notice: Refer to General Repair Instructions in the Preface section.

Special Tools

    • DT 47773 Snap Ring Pliers Adapter Set
    • J 45126 Snap Ring Pliers