GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Transmission 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 1-2 Accumulator Installation

Special Tools

    • J 25025-5 Guide Pins
    • J 36850 Transjel Lubricant

    Object Number: 1890050 Size: SH
  1. Inspect the valve body bonded spacer plate for damage or debris.

    2. Object Number: 5455 Size: SH
  2. Install the #1 checkball into the case.

    3. Object Number: 2035545 Size: SH
  3. Install the J 25025-5 guide pins into the case.

    4. Note: Do not reuse the bonded spacer plate. Replace with a NEW bonded spacer plate.

  4. Place the bonded spacer plate (48) on the case.

    5. Object Number: 1283236 Size: SH
  5. Install the spacer plate support plate (53 or 113).
  6. Install the spacer plate support bolts (77).

    7. Caution: Refer to Fastener Caution in the Preface section.

  7. Install the accumulator bolt (115), model dependent. Tighten the accumulator bolt to 11 N·m (8.11 lb ft).

    8. Object Number: 1283239 Size: SH
  8. Install the 1-2 accumulator housing assembly (57) or gasket (114) and housing (116).
  9. Install the 1-2 accumulator housing bolts (58, 59 or 117, 118).
    10. • Tighten the bolts 58 and 59 to 11 N·m (8 lb ft).
    • Tighten the bolts 117 and 118 to 8-14 N·m (6-10 lb ft).