Important: The part 654A may have 5, 6 or 7 plates.
- Inspect the 3rd and 4th clutch apply plate (653), the fiber plate assemblies
(654A), the steel plates (654B) and the selective backing plate (655) for the following
conditions:
- Install the 3rd and 4th clutch apply plate (653) into
the input housing. Index each leg of the apply plate into the apply ring legs.
Notice: Refer to General Repair Instructions in the Preface section.
Important: The first steel plate (654B)
has the same spline configuration as the 3rd and 4th clutch apply plate (653).
Important: The 3rd and 4th clutch plate stack is model
specific. Clutch plate stack up may be either 6 or 7 plates.
- Install the 3rd and 4th clutch plates starting with a fiber plate assembly (654A)
and alternate with a steel plate (654B).
- Continue the stack up if seven 654A plates are used.
- Inspect the five 3-4 clutch boost spring assemblies (600)
for damaged, worn, broken or missing springs. Springs must be held securely by retainer.
- Install the 3-4 clutch boost spring assemblies (600) into the input housing.
- Install the 3rd and 4th clutch selective backing plate
(655). Some models may have a chamfer on one side of the selective backing plate.
Install the chamfer side up.
- Install the 3rd and 4th clutch backing plate retainer ring (656).
