Rear Fog Lamp Replacement VXR8

Caution: Refer to Battery Disconnect Caution in the Preface section.

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.
3. Remove the rear fog lamp bulb. Refer to Rear Fog Lamp Bulb Replacement.



4. Remove the rear fog lamp housing to fog lamp bracket retaining screws (1).



5. Remove the remaining rear fog lamp bracket to rear bumper fascia retaining screws (1).
6. Remove the rear fog lamp bracket (2) from the rear bumper fascia (3).

Important: The rear fog lamp housing (1) must only be removed from the outward side of the rear bumper fascia (2).

Important: Apply pressure to the rear fog lamp housing (1) to dislodge it from its locating position within the rear bumper fascia (2) disengaging the retention clips (3) in the same movement.




7. Disengage the rear fog lamp housing (1) from the rear bumper fascia (2).

Important: The rear fog lamp housing (1) must only be installed from the outward side of the rear bumper fascia (2).

Important: Apply pressure to the rear fog lamp housing (1) to engage it into its locating position within the rear bumper fascia (2).

Important: Ensure the retention clips (3) are correctly engaged.




1. Install the rear fog lamp housing (1) to the rear bumper fascia (2).



2. Install the rear fog lamp bracket (2) onto the rear bumper fascia (3).
3. Install the rear fog lamp bracket to rear bumper fascia retaining screws (1).

Tighten
Tighten the screws to 2.0 Nm (18 lb in).




4. Install the rear fog lamp housing to fog lamp bracket retaining screws (1).

Tighten
Tighten the screws to 2.0 Nm (18 lb in).

5. Install the rear fog lamp bulb. Refer to Rear Fog Lamp Bulb Replacement.
6. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.
7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.