GM Service Manual Online
For 1990-2009 cars only

Valve Rocker Arm and Push Rod Cleaning and Inspection L98, LS2


    Object Number: 1954181  Size: SH

    Important: Parts that are to be used again must be marked, sorted or organised for assembly.

  1. Mark, sort, or organise the components for assembly. Refer to Separating Parts.
  2. Clean the components with cleaning solvent.
  3. Caution: Refer to Safety Glasses Caution in the Preface section.

  4. Dry the components with compressed air.
  5. Inspect the valve rocker arms bearings (2) for binding or roughness.
  6. Inspect the valve rocker arm pushrod sockets (3) and valve stem mating surfaces (1). These surfaces should be smooth with no scoring or exceptional wear.
  7. Inspect the pushrods for worn or scored ends. These surfaces should be smooth with no scoring or exceptional wear.
  8. Inspect the pushrods for bends. Roll the pushrod on a flat surface to determine if the pushrod is bent.
  9. Inspect the pushrod oil passages for restrictions.
  10. Inspect the rocker arm pivot supports for cracks, wear, or other damage.

Valve Rocker Arm and Push Rod Cleaning and Inspection LS3


    Object Number: 490772  Size: SH

    Important: Parts that are to be used again must be marked, sorted or organized for assembly.

  1. Mark, sort, or organize the components for assembly. Refer to Separating Parts.
  2. Clean the components with cleaning solvent.
  3. Caution: Refer to Safety Glasses Caution in the Preface section.

  4. Dry the components with compressed air.
  5. Inspect the valve rocker arms bearings (2) for binding or roughness.
  6. Inspect the valve rocker arm pushrod sockets (3) and valve stem mating surfaces (1). These surfaces should be smooth with no scoring or exceptional wear.
  7. Inspect the pushrods for worn or scored ends. These surfaces should be smooth with no scoring or exceptional wear.
  8. Inspect the pushrods for bends. Roll the pushrod on a flat surface to determine if the pushrod is bent.
  9. Inspect the pushrod oil passages for restrictions.
  10. Inspect the rocker arm pivot supports for cracks, wear, or other damage.