GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Evaporative Emission Canister Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

    Caution: Refer to Safety Glasses Caution in the Preface section.

  1. Remove the rear frame. Refer to Rear Frame Replacement.

    2. Object Number: 1949797 Size: SH
  2. Disconnect the evaporative emission (EVAP) hoses (1&3) from the EVAP canister.
  3. Remove the purge canister to chassis retaining bolts (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1949797 Size: SH
  1. Install the purge canister to chassis retaining bolts (2).

    2. Tighten
    Tighten the EVAP canister retaining nuts to 6 N·m (53 lb in).

  2. Connect the evaporative emission (EVAP) hoses (1&3) from the EVAP canister.
  3. Install the rear frame. Refer to Rear Frame Replacement.