GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 WM Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Front Bumper Impact Bar Bracket Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

    2. Object Number: 1937479 Size: SH
  2. Remove the front bumper fascia support bracket to front end module retaining bolts (1).
  3. Remove the horn wiring harness clip from the front bumper fascia support bracket.
  4. Remove the front bumper fascia support bracket from the vehicle.

Installation Procedure
  1. Install the front bumper fascia support bracket to the front end module.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1937479 Size: SH
  2. Install the front bumper fascia support bracket to front end module retaining bolts (1).

    3. Tighten
    Tighten the bolts to 4.5 N·m (39 lb in).

  3. Install the horn wiring harness clip to front bumper fascia support bracket.
  4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .