For 1990-2009 cars only
DTC B1243 RSE
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category |
DTC Descriptor
DTC B1243 00: CD-Player Load or Unload PerformanceCircuit/System Description
The DVD player monitors loading/ejecting disc performance.
Conditions for Running the DTC
The DVD player recovers from loading/ejecting error.
Conditions for Setting the DTCs
The DVD player experiences a loading/ejecting error.
Action Taken When the DTC Sets
None.
Conditions for Clearing the DTC
| • | The condition for setting the DTC is no longer present. |
| • | The history DTC will clear after 50 fault-free ignition cycles. |
Reference Information
Schematic Reference
Radio/Navigation System Schematics
Connector End View Reference
Description and Operation
Radio/Audio System Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
- Ignition ON, with a scan tool clear all DTCs.
- Radio ON, play a known good CD. Eject and reinsert the CD several times.
| ⇒ | If the DTC resets, replace the DVD Player. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
