For 1990-2009 cars only
Removal Procedure
- Remove the engine cover. Refer to Engine Cover Replacement .
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
- Loosen the fuel filler cap to relieve any vapour pressure.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Disconnect the engine compartment fuel feed pipe (1) at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
- Disconnect the fuel feed pipe (1) from the fuel feed line. Refer to Metal Collar Quick Connect Fitting Service .
- Cap the fuel pipe to prevent possible fuel system contamination.
Notice: Clean all of the following areas before performing any disconnections
in order to avoid possible contamination in the system:
• The fuel pipe connections • The hose connections • The areas surrounding the connections
Installation Procedure
- Connect the fuel feed pipe (1) from the fuel feed line. Refer to Metal Collar Quick Connect Fitting Service .
- Install the engine compartment fuel feed pipe (1) at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
- Install the fuel filler cap.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Install the engine cover. Refer to Engine Cover Replacement .
| 4.1. | Turn ON the ignition for 2 seconds. |
| 4.2. | Turn OFF the ignition for 2 seconds. |
| 4.3. | Turn ON the ignition. |
| 4.4. | Inspect for fuel leaks. |
