Seat Belt Replacement - Center Rear LHD

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
2. Remove the rear seat back. Refer to Rear Seat Back Replacement.
3. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.



4. Remove the rear seat centre belt anchor nut  (1) then remove the anchor mounting bracket  (2) from the vehicle.



5. Remove the rear seat centre belt noise block (1), the retractor bolt (2) and seat belt retractor (3).

1. Install the centre seat belt retractor (3) to the rear window shelf. Make sure the retainer tab engages the notch in the shelf, then install the retractor bolt (2) and seat belt retractor noise block (1).

Important: Make Sure the retractor is parallel to vehicle centre line.

Notice: Refer to Component Fastener Tightening Notice in the Preface section.

2. Install the centre seat belt retractor fastener (2).

Tighten
Tighten the rear seat centre shoulder belt retractor fastener to 43 N·m (32 lb ft).





Important: Make Sure the centre belt anchor is parallel to vehicle centreline.

3. Install the rear seat centre belt anchor nut  (1) then remove the anchor mounting bracket  (2) from the vehicle.
4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.
5. Install the rear seat back. Refer to Rear Seat Back Replacement.
6. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.

Seat Belt Replacement - Center Rear RHD

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
2. Remove the rear seat back. Refer to Rear Seat Back Replacement.
3. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.



4. Remove the rear seat centre belt anchor nut  (1).
5. Remove the anchor mounting bracket  (2) from the vehicle.



6. Remove the rear seat centre belt noise block (1).
7. Remove the retractor bolt (2).
8. Remove the seat belt retractor (3).

Important: Make Sure the retractor is parallel to vehicle centre line.

1. Install the centre seat belt retractor (3) to the rear window shelf. Make sure the retainer tab engages the notch in the shelf.
2. Install the retractor bolt (2) and seat belt retractor noise block (1).

Notice: Refer to Component Fastener Tightening Notice in the Preface section.

3. Install the centre seat belt retractor fastener (2).

Tighten
Tighten the fastener to 43 N·m (32 lb ft).





Important: Make Sure the centre belt anchor is parallel to vehicle centreline.

4. Install the rear seat centre belt anchor nut (1).
5. Remove the anchor mounting bracket (2) from the vehicle.
6. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.
7. Install the rear seat back. Refer to Rear Seat Back Replacement.
8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.