GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 WM Sedan 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Front Bumper Fascia Reinforcement Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

    2. Object Number: 1937408 Size: SH
  2. Remove the rivet (2) that secures the front bumper fascia reinforcement (1) to the front bumper fascia. The rivet must be discarded after removal.

    3. Discard the rivet.

  3. Remove the front bumper fascia reinforcement (1) from the front bumper fascia.

Installation Procedure

    Object Number: 1937408 Size: SH
  1. Position the front bumper fascia reinforcement (1) to the front bumper fascia.
  2. Install the NEW rivet (2) to secure the front bumper fascia reinforcement to the front bumper fascia.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .