GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 WM Sedan 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear License Plate Housing Replacement

Removal Procedure

    Important: Carefully remove the licence lamp moulding. Failure to do so will result in damage to the moulding and the rear compartment lid.

  1. Remove the rear licence lamp. Refer to Rear License Lamp Replacement.

    2. Object Number: 1940113 Size: SH

    Important: Take care not to damage the paint on the vehicle when prying the rear licence lamp moulding from the rear compartment lid.

  2. Remove the rear licence lamp moulding to rear bumper fascia retaining clips (1) and discard.

    3. Discard the retaining clips.

  3. Use a suitable tool to carefully remove the rear licence lamp moulding starting from the rear edge of the rear bumper fascia by prying the rear licence lamp moulding away from the rear bumper fascia.
  4. Remove the rear licence lamp moulding from the rear bumper fascia.

Installation Procedure

    Object Number: 1940113 Size: SH
  1. Install the licence lamp rear moulding to the rear bumper fascia.
  2. Install NEW retaining clips (1) the rear licence lamp moulding.
  3. Install the rear licence lamp . Refer to Rear License Lamp Replacement.