Tools Required

1. Remove the transmission torque converter. Refer to Torque Converter Replacement .



2. Remove and discard the torque converter seal retaining bolts.
3. Remove the torque converter seal using J 45000 .

1. Assemble J 8092 onto J 44766 .
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

Important: Align the torque converter seal with the bolt holes.

3. Install the torque converter seal into the torque converter housing.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the NEW torque converter seal retaining bolts.

Tighten
Tighten the bolts to 3.6 N·m (32 lb. in).

5. Install the transmission torque converter. Refer to Torque Converter Replacement .