GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tools Required

    • J 25019 Bushing Service Set
    • J 34196-B Transmission Bushing Service Set
    • J 7004-A Universal Remover
    • J 8092 Universal Driver Handle - 3/4 in - 10

    Object Number: 7893  Size: SH
  1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
  2. • Damaged or worn bushings
    • Surface finish on the hub and outer housing - check band surface for flatness
    • Leak at the weld
    • Heat distortion
    • Rolled or distorted retaining ring groove

    Object Number: 7857  Size: SH
  3. Using the J 25019-16 with the J 7004-A , remove the reverse input clutch front bushing  (603).

  4. Object Number: 7858  Size: SH
  5. Using the J 25019-4 with the J 8092 , remove the reverse input clutch rear bushing  (606).

Installation Procedure


    Object Number: 7872  Size: SH
  1. Using the J 25019-9 with the J 8092 , install a reverse input clutch front bushing  (603).

  2. Object Number: 7874  Size: SH
  3. Using the J 34196-3 which is part of kit J 34196-B with the J 8092 , install a reverse input clutch rear bushing  606).