For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Pry off the reading lamp lens.
- Remove the screws and the reading lamp.
- Disconnect the electrical connector.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Connect the electrical connector.
- Install the reading lamp with the screws and tighten to 1.5 N·m (13 lb in).
- Install the reading lamp lens.
- Connect the negative battery cable.
Caution: Refer to Fastener Caution in the Preface section.
