GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1308936  Size: SH
  1. Remove the coin storage and the screws.
  2. Separate the hood release cable from the hood latch release handle.
  3. Carefully pull the instrument panel (I/P) under cover until the mounting clips are released and the I/P under cover.

  4. Object Number: 1308959  Size: SH
  5. Remove the bolts from the driver side knee bolster.
  6. Remove the knee bolster.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1308959  Size: SH
  1. Install the knee bolster with the bolts.
  2. Tighten
    Tighten the driver side knee bolster mounting bolts to 10 N·m (89 lb in).


    Object Number: 1308936  Size: SH
  3. Install the I/P under cover.
  4. Connect the hood release cable to the hood latch release handle.
  5. Install the coin storage and the screws.