GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 VE Ute 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Center Console End Panel Replacement

Removal Procedure

    Object Number: 2009722 Size: SH
  1. Using a suitable flat blade tool, remove the centre console upper retaining screw cover (1) from the centre console end panel (2).

    2. Object Number: 2009719 Size: SH
  2. Remove the centre console end panel to centre console upper retaining screws (1).

    3. Object Number: 2009721 Size: SH
  3. Using a suitable flat blade tool, remove the centre console lower retaining screw cover (1) from the centre console end panel (2).

    4. Object Number: 2009720 Size: SH
  4. Remove the centre console end panel to centre console lower retaining screws (2).
  5. Remove the centre console end panel (1) from the centre console (3).

Installation Procedure

    Object Number: 2009720 Size: SH
  1. Install the centre console end panel (1) to the centre console (3).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the centre console end panel to centre console lower retaining screws (2).

    3. Tighten
    Tighten the screws to 2  N·m (18 lb in).


    Object Number: 2009721 Size: SH

    Important: Listen for an audible click from the centre console lower retaining screw cover (1) to confirm fitting.

  3. Install the centre console lower retaining screw cover (1) to the centre console end panel (2).

    4. Object Number: 2009719 Size: SH
  4. Install the centre console end panel to centre console upper retaining screws (1).

    5. Tighten
    Tighten the screws (1) to 2  N·m (18 lb in).


    Object Number: 2009722 Size: SH

    Important: Listen for an audible click from the centre console end panel retaining screw cover (1) to confirm fitting.

  5. Install the centre console end panel retaining screw cover (1) to the centre console (2).