Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement .
3. Remove the transmission electrical connector. Refer to Automatic Transmission Electrical Connector Passage Sleeve Replacement .

1

Manual Shaft Detent Bolt

Tighten
12 N·m (106 lb. in)

2

Manual Shaft Detent Assembly

3

Control Valve Assembly Bolt (Qty: 6)

Tighten
8 N·m (71 lb. in)

4

Control Valve Assembly

5

Fluid Pump Seal

Discard seal and replace with new.

6

Fluid Pump Seal

Discard seal and replace with new.

7

Centre Support Fluid Passage Seal

Discard seal and replace with new.