Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.

Important: On vehicles equipped with rocker panel moldings, the rocker panel molding lower covers MUST be removed prior to lifting.

(1)	Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)	Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)	Frame Contact Hoist, Lower Rocker Panel Molding Covers
(1)	Frame Contact Hoist, Lower Rocker Panel Molding Covers
(2)	Floor Jack
(2)	Floor Jack
(2)	Floor Jack
(3)	Suspension Contact Hoist
(3)	Suspension Contact Hoist
(3)	Suspension Contact Hoist
(4)	Center Rocker Lift Point (Left Hand/Right Hand)
(5)	Rear Suspension Axle Lift Point

Hoist Locations