GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1375328 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the manifold absolute pressure (MAP) sensor connector.
  3. Remove the MAP sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375312 Size: SH
  1. Install the MAP sensor.

    2. Tighten
    Tighten the MAP sensor to 8 N·m (71 lb in).

  2. Connect the MAP sensor connector.
  3. Connect the negative battery cable.