GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Barina 🢒 General Information 🢒 General Information 🢒 Front Brake Shield Replacement

Removal Procedure

    Object Number: 1245702 Size: SH
  1. Remove the rotor. Refer to Brake Rotor Replacement .
  2. Remove the screws for the splash shield from the steering knuckle.
  3. Remove the splash shield.

Installation Procedure

    Object Number: 1245702 Size: SH
  1. Install the splash shield.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Secure the splash shield to the steering knuckle with the screws.

    3. Tighten
    Tighten the splash shield-to-steering knuckle screws to 4 N·m (35 lb in).

  3. Install the rotor. Refer to Brake Rotor Replacement .