GM Service Manual Online
For 1990-2009 cars only

    Object Number: 589370  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the threaded oil gallery plugs.
  2. Tighten
    Tighten the oil gallery plugs to 30 N·m (22 lb ft).


    Object Number: 1646930  Size: SH
  3. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the engine block heater.
  4. Install the engine block heater.
  5. Tighten
    Tighten to 50 N·m (37 lb ft).


    Object Number: 26198  Size: SH
  6. Install the remaining oil gallery plugs using GM P/N 12346004 (Canadian P/N 10953480) or the equivalent.

  7. Object Number: 875115  Size: SH
  8. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or the equivalent to the threads of the knock sensor.
  9. Install the knock sensors.
  10. Tighten
    Tighten the knock sensors to 18 N·m (13 lb ft).

  11. Install the knock sensor heat shield and bolts, if applicable.
  12. Tighten
    Tighten the knock sensor heat shield bolts to 50 N·m (37 lb ft).