Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .

1

Cover, Shoulder Belt Guide Trim

2

Nut, Shoulder Belt Guide

Tighten
29 N·m (31 lb ft)

3

Guide, Shoulder Belt

4

Panel, Center Pillar Upper Trim

Refer to Center Pillar Upper Trim Panel Replacement .

5

Panel, Center Pillar Lower Trim

Refer to Center Pillar Lower Trim Panel Replacement .

Tip
Lift the trim panel up enough to access the seat belt retractor bolt.

6

Bolt, Driver Seat Belt Retractor

Tighten
43 N·m (3 lb ft)

7

Bezel, Shoulder Belt Retractor

8

Belt Assembly, Driver Seat

Tip

1. Remove the seat belt anchor from the seat stud.
2. Remove the seat belt and lower trim panel as an assembly.
3. Slide the bezel up and remove the belt from the lower trim panel.