Rear Side Door Actuator Control Module Scan Tool Information Right or Left
| Table 1: | Power Sliding Door Module Scan Tool Data Parameters |
| Table 2: | Power Sliding Door Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
PSD Detent Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the power sliding door (PSD) detent switch. |
PSD Front Control Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the power sliding door (PSD) front control switch. |
PSD Latch Solenoid Command | -- | Inactive | The scan tool displays Active or Inactive. This is the commanded state of the power sliding door (PSD) latch solenoid. |
PSD Motor Clutch Command | -- | Inactive | The scan tool displays Active or Inactive. This is the commanded state of the power sliding door (PSD) motor clutch. |
PSD Motor Command | -- | Idle | The scan tool displays Idle, Open or Close. This is the commanded state of the power sliding door (PSD) motor. |
PSD Open/Close Position Learned | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the power sliding door (PSD) learned the open/close position. |
PSD Position Sensor 1 | -- | Varies | This displays Counts. |
PSD Position Sensor 2 | -- | Varies | This displays Counts. |
PSD Rear Control Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the power sliding door (PSD) rear control switch. |
PSD System Enable Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the power sliding door (PSD) system enable switch. |
PSDM Configuration | -- | Right or Left | The scan tool displays Right, Left or Invalid. This is the corresponding power sliding door (PSD) module. |
Vehicle In Park | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle is in park. |
Output Control | Description |
|---|---|
PSD Latch Test | This output control is used to command the corresponding power sliding door (PSD) latch. |
PSD Open/Close Test | This output control is used to command the corresponding power sliding door (PSD) to open and close. |
