If the remote control door lock receiver is replaced, the following procedures must be performed:

1. Keyless Entry Transmitter Programming -- Refer to Transmitter Programming .
2. Tire Type Setup:

2.1.	Install a scan tool

2.2.	Select Remote Control Door Lock Receiver Module Setup in the Body menu.

2.3.	Select Tire Type/Pressure Selection.

2.4.	Follow the on-screen instructions.

3. Tire Pressure Monitoring Sensor Learn -- Refer to Tire Pressure Sensor Learn .
4. RCDLR Setup:

4.1.	Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.

4.2.	Select Setup New RCDLR.

4.3.	Follow the on-screen instructions.