GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Terraza Ext. 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the load level sensor for the left side.

    3. Object Number: 629208 Size: SH
  3. Remove the stabilizer shaft insulator bracket bolts and nuts.
  4. Remove the stabilizer shaft insulator brackets.
  5. Remove the stabilizer shaft insulators from the stabilizer shaft.

Installation Procedure

    Object Number: 629208 Size: SH
  1. Install the stabilizer shaft insulators to the stabilizer shaft.
  2. Install the stabilizer shaft insulator brackets.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft insulator bracket bolts and nuts.

    4. Tighten
    Tighten the stabilizer shaft insulator bracket nuts to 85 N·m (63 lb in).

  4. Install the load level sensor for the left side.
  5. Lower the vehicle.