GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Place vehicle on alignment machine with rear wheels supported by Weaver plates.

  2. Object Number: 629235  Size: SH
  3. Loosen rear lower control arm mounting nuts (3, 4) .
  4. Adjust camber with cam bolt (1).
  5. Confirm correct camber value.
  6. Check toe alignment and adjust if required.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 629235  Size: SH
  1. Tighten the lower control arm mounting nuts (3, 4).
  2. Tighten

        • Tighten the nut (3) to 145 N·m (107 lb ft).
        • Tighten the nut (4) to 50 N·m (37 lb ft).
  3. Test drive the vehicle.