For 1990-2009 cars only
Tools Required
| • | DT-47722 Shift Rail Bushing Remover and Installer |
| • | J 2619-01 Slide Hammer |
| • | J 26941 Bushing and Bearing Remover 3-4 in |
Rear Case Disassemble
- Remove the oil trough (17).
- Remove the bolt (38) and retainer (21).
- Remove the gasket (29).
- Using J 26941 (2) and J 2619-01 (1) , remove the counter gear roller bearing (138).
- Using DT-47722 , remove the shift shaft bearing (25) from the case.
Middle Case Disassemble
Using DT-47722 , remove the shift shaft bearing (8) from the middle case.
Clutch Housing Disassemble
Remove the input shaft seal (12) from the front case (11).
