Notice: Refer to Fastener Notice in the Preface section.

Preliminary Procedure

Remove the driver side instrument panel (I/P) insulator and knee bolster. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages, and Console.

1

Body Control Module Screws (Qty: 3)

Tighten
2 N·m (18 lb in)

2

Body Control Module Assembly

Tip

1. Disconnect the electrical connectors.
2. Reprogram the body control module. Refer to Control Module References for programming and setup information.