SERVICE MAN. UPDATE-SEC. 10-5 BODY FRT. END-HOOD REMOVAL. Buick Skylark 1994

REVISION: 11/03/94

THIS BULLETIN IS BEING REVISED TO INCLUDE THE 1994-95 MODEL YEARS.

PREVIOUS DIVISIONAL PUBLICATIONS NUMBERS WERE: BUICK: 93-10-9 GM OF CANADA: 93-10-601 OLDSMOBILE: 93-U-15 PONTIAC: 93-10-12 ----------------------------------------------------------------------

SUBJECT: SERVICE MANUAL UPDATE - SECTION 10-5 - BODY FRONT END - HOOD REMOVAL WITHOUT BREAKING MIG WELDS

MODELS: 1993-95 BUICK SKYLARK 1993-95 OLDSMOBILE ACHIEVA 1993-95 PONTIAC GRAND AM

THIS BULLETIN IS TO DISCOURAGE TECHNICIANS FROM BREAKING THE MIG WELDS ON THE UPPER (RT. & LT.) HOOD HINGES TO REMOVE THE HOOD.

SOME OF THE ABOVE VEHICLES WERE PRODUCED WITH A SINGLE 6MM (1/4 INCH) MIG WELD ATTACHING EACH OF THE UPPER HOOD HINGES TO THE HOOD.

HOOD:

REMOVE OR DISCONNECT - 1. RAISE HOOD. INSTALL PROTECTIVE COVERING OVER FENDERS TO PREVENT DAMAGE TO PAINT. 2. ENGINE COMPARTMENT LAMP (IF APPLICABLE). 3. TOP VENT GRILLE PANEL. REFER TO SERVICE PROCEDURE IN SECTION 10-5 OF THE APPROPRIATE SERVICE MANUAL. 4. HOOD OPEN ASSIST RODS (IF APPLICABLE). 5. PIVOT BOLTS (1) - (SEE ATTACHED ILLUSTRATION). 6. HOOD ASSEMBLY WITH AID OF HELPER.

INSTALL OR CONNECT: 1. HOOD ASSEMBLY WITH AID OF HELPER AND SUPPORT HOOD. 2. PIVOT BOLTS (1) TO 30 N.M (20 LBS. FT.). 3. HOOD OPEN ASSIST RODS (IF APPLICABLE). 4. TOP VENT GRILLE PANEL. 5. ENGINE COMPARTMENT LAMP (IF APPLICABLE). 6. REMOVE PROTECTIVE COVERING, CLOSE HOOD.

FIGURES: 1

Object Number: 84184 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.