GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1996 🢒 Riviera 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Fuel Pump Control Module

Removal Procedure

    Object Number: 13593 Size: SH
  1. Disconnect the negative battery cable.
  2. Pull back the rear compartment trim. Refer to Body Rear End.
  3. Remove the fuel pump control module attaching nut.
  4. Disconnect the fuel pump control module electrical connector.

Installation Procedure

    Object Number: 13593 Size: SH
  1. Install the fuel pump control module attaching nut.
  2. Connect the fuel pump control module electrical connector.

    3. Tighten
    Tighten the fuel pump control module attaching nut to 9 N·m (80 lb in).

  3. Install the rear compartment trim. Refer to Body Rear End.
  4. Connect the negative battery cable.