Rear Storage Compartment Replacement Rendezvous

1. Open the liftgate.
2. Open the rear compartment storage lid.
3. Remove the seat anchor nuts from the rear storage compartment.
4. Remove the rear storage compartment.

1. Install the rear storage compartment to the seat anchor studs.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the seat anchor nuts to the rear storage compartment.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

3. Close the rear storage compartment.
4. Close the liftgate.