GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Body 🢒 Wiring Systems 🢒 Power Mirror Replacement

Removal Procedure

    Object Number: 621571 Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the nuts from the outside rearview mirror.
  3. Disconnect the electrical connector from the outside rearview mirror.
  4. Remove the outside rearview mirror from the front door.

Installation Procedure

    Object Number: 621571 Size: SH
  1. Install the outside rearview mirror to the front door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the outside rearview mirror nuts.

    3. Tighten
    Tighten the outside rearview mirror nuts to 10 N·m (89 lb in).

  3. Connect the electrical connector to the outside rearview mirror.
  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .