GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Fluid Temperature Sensor Replacement

Removal Procedure
  1. Remove the case side cover. Refer to Control Valve Body Cover Replacement .

    2. Object Number: 48209 Size: SH
  2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual valve position switch (395) and/or the temperature sensor (391).

    3. Object Number: 48210 Size: SH
  3. Remove the wiring harness (224).

Installation Procedure

    Object Number: 48210 Size: SH
  1. Connect the wiring harness (224).

    2. Object Number: 49409 Size: SH
  2. Install the wiring harness to the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual valve position switch (395) and/or the temperature sensor (391).
  3. Install the case side cover. Refer to Control Valve Body Cover Replacement .

    4. Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the transaxle.

  4. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications .
  5. Inspect the transaxle fluid level. Refer to Transmission Fluid Check .
  6. Inspect for fluid leaks.

    7. Important: It is recommended that transmission adaptive pressure (TAP) information be reset.

    Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.

  7. Reset the TAP values. Refer to Transmission Adaptive Functions .