GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Rendezvous - FWD 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Fog Lamp Switch Replacement

Removal Procedure

    Object Number: 629226 Size: SH
  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.
  2. Grasp the fog lamp switch and pull firmly to release the retaining tabs from the I/P carrier.

    3. Object Number: 629224 Size: SH
  3. Disconnect the electrical connector from the fog lamp switch.
  4. Remove the fog lamp switch.

Installation Procedure

    Object Number: 629224 Size: SH
  1. Connect the electrical connector to the fog lamp switch.

    2. Object Number: 629226 Size: SH
  2. Position the fog lamp switch to the retainers in the I/P carrier.
  3. Install the fog lamp switch to the I/P carrier. Press the switch into place until fully seated.
  4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.