Second Seat Audio Control Replacement Aztek

1. Using a flat-bladed tool, gently pry the second seat audio control out from the overhead console.



2. Disconnect the electrical connector.

1. Connect the electrical connector.
2. Align the second seat control to the overhead console.



3. Gently install the second seat control into the overhead console by pushing forward and inward.

Second Seat Audio Control Replacement Rendezvous

1. Raise the front armrest.
2. Remove 2 screws that secure the rear console trim plate.



3. Pull the trim plate away from the console.
4. Disconnect the electrical connectors.



5. Press the back of the audio control to release the control from the trim plate.
6. Remove the second seat audio control.

1. Press the second seat audio control into the rear console trim plate.
2. Connect the electrical connectors to the audio control



3. Press the trim plate onto the center console.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install 2 screws that secure the rear console trim plate.

Tighten
Tighten the screws to 2 N·m (18 lb in).

5. Close the front armrest.