Head Up Display Switch Replacement Rendezvous

1. Use a small, flat bladed tool to remove the driver information center (DIC) , head up display switch from the cluster trim plate.



2. Remove the electrical connectors from the switch.
3. Remove the switch.

1. Install the electrical connectors to the head up display switch.



2. Install the head up display switch to the cluster trim plate.



3. Push the switch assembly to the cluster trim plate until seated.

Head Up Display Switch Replacement Aztek

1. Use a flat-bladed tool to press down and release the clip at the top of the Driver Information Center Switch.



2. Disconnect the electrical connectors.
3. Remove the driver information center switch.

1. Connect the electrical connectors to the switch.



2. Install the driver information center switch to the IP trim plate.
3. Push the switch assembly to the IP trim plate until the assembly is fully seated.