GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Rendezvous - FWD 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Window Belt Outer Sealing Strip Replacement

Removal Procedure

    Object Number: 628736 Size: SH
  1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  2. Remove the rear screw from the front door outer belt sealing strip.
  3. Remove the outer belt sealing strip by pulling the sealing strip from the front door pinchweld flange.

Installation Procedure

    Object Number: 628736 Size: SH
  1. Position the outer belt sealing strip to the front door pinchweld flange.
  2. Install the sealing strip to the pinchweld flange pressing into place until fully seated.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screw to the rear of the front door outer belt sealing strip.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  4. Install the outside rearview mirror. Refer to Power Mirror Replacement .