GM Service Manual Online
For 1990-2009 cars only

Step

Action

Values

Yes

No

Schematic Reference: Heated Seats Schematics

Connector End View Reference: Power Seat Connector End Views

DEFINITION: The driver or passenger heated seat is inoperative.

1

Did you review the Heated Seat System Description and Operation and perform the necessary inspections?

--

Go to Step 2

Go to Symptoms - Seats

2

  1. Start the engine.
  2. Turn the heated seat switch ON.

Does the heated seat operate properly?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

Does the heated seat switch indicator illuminate when the switch is turned ON?

--

Go to Step 6

Go to Step 4

4

Test the heated seat switch ignition voltage supply circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 5

5

Test the heated seat switch ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 11

6

  1. Disconnect the heated seat cushion 4-way connector.
  2. Connect a test lamp from the heated seat switch signal circuit terminal in the harness connector to ground.
  3. Start the engine.
  4. Turn the heated seat switch ON.

Does the test lamp illuminate?

--

Go to Step 7

Go to Step 10

7

Test the heated seat battery positive voltage supply circuit for an open or short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 8

8

Test the heated seat ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 9

9

  1. Disconnect the heated seat back element connector.
  2. Measure the resistance of the heated seat back element. Refer to Circuit Testing in Wiring Systems.

Is the resistance within the specified values?

0.5-2 ohms

Go to Step 15

Go to Step 13

10

Test the heated seat switch signal circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 11

11

Inspect for poor connections at the heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 12

12

Replace the heated seat switch.

Is the repair complete?

--

Go to Step 17

--

13

Inspect for poor connections at the heated seat back element connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 14

14

Replace the heated seat back element. Refer to Driver or Passenger Seat Back Cushion Heater Replacement .

Is the repair complete?

--

Go to Step 17

--

15

Inspect for poor connections at the heated seat cushion 4 way connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 17

Go to Step 16

16

Replace the heated seat cushion element. Refer to Driver or Passenger Seat Cushion Heater Replacement .

Is the repair complete?

--

Go to Step 17

--

17

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3