Stabilizer Shaft Insulator Replacement IRS

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the height sensor from the lower control arm as necessary.



3. Remove the stabilizer shaft insulator bracket bolts and nuts.
4. Remove the stabilizer shaft insulator brackets along with the automatic level control (ALC) position sensor, if necessary.
5. Remove the stabilizer shaft insulators from the stabilizer shaft.

1. Install the stabilizer shaft insulators to the stabilizer shaft.
2. Install the stabilizer shaft insulator brackets along with the ALC position sensor, if necessary.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the stabilizer shaft insulator bracket bolts and nuts.

Tighten
Tighten the stabilizer shaft insulator bracket nuts to 85 N·m (63 lb ft).

4. Connect the height sensor to the lower control arm as necessary.
5. Lower the vehicle.