Rear Camber Adjustment IRS

1. Place vehicle on alignment machine with rear wheels supported by Weaver plates.



2. Loosen rear lower control arm mounting nuts (3, 4) .
3. Adjust camber with cam bolt (1).
4. Confirm correct camber value.
5. Check toe alignment and adjust if required.

Notice: Refer to Fastener Notice in the Preface section.




1. Tighten the lower control arm mounting nuts (3, 4).

Tighten
Tighten the nut (3) 145 N·m (107 lb ft); tighten (4) to 50 N·m (37 lb ft).

2. Test drive the vehicle.