GM Service Manual Online
For 1990-2009 cars only

Parking Brake Rear Cable Replacement - Left Side Disc

Removal Procedure

Caution: Refer to Brake Dust Caution in the Preface section.

  1. Release the park brake.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  3. Object Number: 474301  Size: SH
  4. Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.

  5. Object Number: 651433  Size: SH
  6. Remove the rear park brake cable retaining nut and bolt.
  7. Remove the park brake cable from the park brake actuator.

Installation Procedure

  1. Install the park brake cable.
  2. Install the park brake cable to the park brake cable bracket.

  3. Object Number: 651433  Size: SH
  4. Install the park brake cable to the park brake actuator.
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the rear park brake cable retaining nut and bolt.
  7. Tighten
    Tighten to 10 N·m (89 lb in).


    Object Number: 474301  Size: SH
  8. Install the park brake left side cable to the park brake equalizer.
  9. Adjust the park brake cable. Refer to Park Brake Adjustment .
  10. Lower the vehicle.

Parking Brake Rear Cable Replacement - Left Side Drum

Tools Required

J 37043 Park Brake Cable Release Tool

Removal Procedure

Caution: Refer to Brake Dust Caution in the Preface section.

  1. Release the park brake.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  3. Object Number: 474301  Size: SH
  4. Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.
  5. For domestic vehicles, perform the following steps.
  6. 4.1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    4.2. Remove the brake drum. Refer to Brake Drum Replacement in Drum Brakes.
  7. Remove the park brake cable from the park brake actuator.

  8. Object Number: 177173  Size: SH
  9. Use the J 37043 in order to remove the park brake cable from the backing plate.

Installation Procedure

  1. Install the park brake cable to the backing plate.
  2. Install the park brake cable to the park brake actuator.
  3. Install the park brake left side cable to the park brake equalizer.

  4. Object Number: 474301  Size: SH
  5. Adjust the park brake cable. Refer to Park Brake Adjustment .
  6. Install the brake drum. Refer to Brake Drum Replacement in Drum Brakes.
  7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  8. Lower the vehicle.