Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Diagnostic System Check - Engine Cooling ? | Go to Step 2 | |
2 | Start the engine. Does the Engine Coolant Temperature indicator illuminate? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 | With the scan tool, observe the engine coolant temperature parameter in the powertrain control module (PCM) or engine control module (ECM) data list. Does the scan tool indicate that the coolant temperature is within the temperature range shown on the temperature gage? | Go to Engine Overheating | Go to Step 4 |
4 | Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console. Did you complete the repair? | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
