GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Rendezvous - AWD 🢒 Suspension 🢒 Automatic Level Control 🢒 Automatic Level Control Sensor Link Ball Stud Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 380438 Size: SH

    Important: When removing the link, do NOT bend or break the sensor arm.

  2. Remove the automatic level control sensor link from the lower control arm ball stud.
  3. Remove the ball stud from the rear lower control arm.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 380438 Size: SH
  1. Install the ball stud to the rear lower control arm.

    2. Tighten
    Tighten the height sensor ball stud to 4 N·m (35 lb in).

  2. Install the automatic level control sensor link to the lower control arm ball stud.
  3. Lower the vehicle.