Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Open the door.



2. Remove the lower half of the rear door weatherstrip and retainers using J 38778 .
3. Remove the upper half of the rear door weatherstrip pulling the weatherstrip from the track.
4. Remove the weather-strip from the door.

1. Install the weather-strip onto the door.
2. Install the upper half of the rear door weatherstrip pushing the weatherstrip into the track.
3. Install the lower half of the rear door weatherstrip, pressing in on the retainers until each retainer is fully seated.
4. Close the door.