Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Open the door.



2. Remove the lower half of the front door weatherstrip and retainers using J 38778 .
3. Pull the upper edges of the weather-strip off the pinchweld flange.
4. Remove the upper half of the front door weatherstrip pulling the weatherstrip from the track.
5. Remove the weather-strip from the door.

1. Install the weather-strip onto the door.
2. Press the upper half of the front door weatherstrip pushing the weatherstrip into the track.
3. Install the lower half of the front door weatherstrip, pressing in onto the retainers until each retainer is fully seated.
4. Close the door.